SUP-P262-B PTFE Submersible level meter

The anti-corrosion input liquid level transmitter uses a high-performance ceramic pressure sensor as a measuring element to accurately measure the hydrostatic pressure proportional to the liquid level depth, and convert it into a standard current, voltage or RS485 signal output through a signal conditioning circuit , establish a linear correspondence between the output signal and the liquid level depth, and realize the measurement of the liquid depth. The product is made of polytetrafluoroethylene anti-corrosion material, which has excellent corrosion resistance and is widely used in liquid level measurement of acid, alkali and other corrosive media in chemical plants.

Characteristics

Pressure type: Gauge pressure

Measuring range: 0~1m...200m water column

Accuracy: 1%,0.5%(range ≥ 5 meters)

The anti-corrosion input liquid level transmitter uses a high-performance ceramic pressure sensor as a measuring element to accurately measure the hydrostatic pressure proportional to the liquid level depth, and convert it into a standard current, voltage or RS485 signal output through a signal conditioning circuit , establish a linear correspondence between the output signal and the liquid level depth, and realize the measurement of the liquid depth. The product is made of polytetrafluoroethylene anti-corrosion material, which has excellent corrosion resistance and is widely used in liquid level measurement of acid, alkali and other corrosive media in chemical plants.

Parameters

Product	Submersible level meter
Model	P262-B
Pressure type	Gauge pressure
Measuring range	0~1m...200m water column
Accuracy	1%,0.5%(range ≥ 5 meters)
Output and power supply range	(4~20) mA output (10~32) V (0~10) V output (12~32) V RS485 output (8~32) V
Compensation temperature	(0~70) ℃
Medium temperature	(-40~125) ℃
Storage temperature	(-40~85)°C
Overload pressure	200%FS
Long-term stability	±0.5%FS/year
Response time	Current, voltage output type pressure ≤ 10ms (up to 90% FS) RS485 output type pressure ≤ 100ms (up to 90% FS)
Insulation resistance	20MΩ/250VDC
Ingress protection	IP68
Load resistance	(4~20) mA output: load resistance ≤ (U-10V)/0.02A, U is the supply voltage Voltage output: load resistance ≥ 5kΩ